Vacuum Technology, Coating & Hardware | Vacuum Processing, Thin Films, Sputtering, PVD & Gas Analyti

Time 2020-12-21 22:09:24

Web Name: Vacuum Technology, Coating & Hardware | Vacuum Processing, Thin Films, Sputtering, PVD & Gas Analyti

WebSite: http://www.vtcmag.com

ID:141938

Keywords:

Hardware,Processing,Coating,vacuumprocessing,vacuumcoating,vacuumtechnology,vacu

Description:

December 2020 Photorefractive Polymers, Introduction Dr. Peter Martin view magazine November 2020 The Emergence of Plasma Technology for Disinfection and Sterilization for Various Biotech Industrial Applications Dr. Megha Agrawal and Dr. Shyamasri Biswas view magazine October 2020 Next Generation Nanolithography Dr. Narendra Parmar, Dr. Ilker Bayer, Abhijit Biswas view magazine September 2020 Nonlinear Optical Thin Films: Introduction Dr. Peter Martin view magazine August 2020 Guides to Vacuum Technology: High Speed Pulse Valves Part 1 Steve Hansen view magazine July 2020 Bridging the Technology Gap between Micro-electronics and Synthetic Biological World Dr. Abhijit Biswas view magazine Selecting the Correct Gauge for the Task Guides to Vacuum Technology Spectroscopic Ellipsometry of Transparent Uniaxial Anistropic Thin Films Characterization of Thin Film They come in three flavors and can transform among these different types as they travel. They pass through most matter undetected and uninterrupted. Tens of trillions of them are passing through your body in the time it takes to read this sentence. But don’t worry – they are harmless. They are produced by the sun, within the Earth, at nuclear reactors, by exploding stars, and by cosmic rays interacting with Earth’s atmosphere, among other sources. Berkeley Labs December 8, 2020This Anti-COVID Mask Breaks the MoldScientists from Berkeley Lab and UC Berkeley have designed a rechargeable N95 mask with a custom fitNews Release Theresa Duque (510) 495-2418 • December 9, 2020Share2TweetRedditShare2 SharesIn the fight against COVID-19, scientists at Berkeley Lab and UC Berkeley are developing an N95 quality-assessment test; a rechargeable, reusable, anti-COVID N95 mask; and a 3D-printable silicon-cast mask mold. (Credit: Alexander Kirch/Shutterstock)In the early days of the pandemic, amidst all the uncertainty, one thing was for sure: N95 masks – the personal protective respiratory devices that filter out viruses, bacteria, and wildfire smoke – were in short supply. So when materials scientists Jeff Urban and Peter Hosemann heard that a local HMO needed advice on N95 alternatives, they immediately knew what to do: Make a better mask. Berkeley Labs December 8, 2020 Berkeley Lab: News Center Microbe “Rewiring” Technique Promises a Boom in Biomanufacturing Researchers from Lawrence Berkeley National Laboratory (Berkeley Lab) have achieved unprecedented success in modifying a microbe to efficiently produce a compound of interest using a computational model and CRISPR-based gene editing.Their approach could dramatically speed up the research and development phase for new biomanufacturing processes, and get cutting-edge bio-based products such as sustainable fuels and plastic alternatives on the shelves faster. Berkeley Lab November 10, 2020 Oak Ridge National Laboratory: Neutrons chart atomic map of COVID-19’s viral replication mechanism To better understand how the novel coronavirus behaves and how it can be stopped, scientists have completed a three-dimensional map that reveals the location of every atom in an enzyme molecule critical to SARS-CoV-2 reproduction.Researchers at the Department of Energy’s Oak Ridge National Laboratory used neutron scattering to identify key information to improve the effectiveness of drug inhibitors designed to block the virus’s replication mechanism. The research is published in the Journal of Biological Chemistry. ORNL October 27, 2020 Vacuum Technology Primer Since 2000 Vacuum Technology Coating Magazine has been the industry's leading source for the latest articles, news, and product and service information. Below we describe some of the terms that you will find in a typical issue of VT&C. Vacuum Coating (Vacuum Deposition and Thin Film Deposition) is the process of depositing a film or other material atom by atom or molecule by molecule onto a surface in a low pressure environment or vacuum. Physical Vapor Deposition or PVD refers to vacuum deposition methods which involve the material (which is being deposited) going from a condensed phase to a vapor phase and then to a thin film condensed phase. Sputtering and evaporation are common PVD processes. Sputtering refers to a type of process used to deposit thin films and employs a plasma to bombard and eject atoms from a target source. Evaporation refers to the heated source material being evaporated in a vacuum. Vacuum allows vapor particles to travel directly to the target object, where they condense back to a solid state. (called a Deposition Source) refers to a type of process used to deposit thin films and employs a plasma to bombard and eject atoms from the target source (called a Deposition Source). Vacuum Hardware refers to the types of hardware and components that are used in the vacuum process. There are many types of hardware used in this process, some examples are flanges, fittings, seals, valves, and chambers. Thin Film Metrology involves determining the optimal thickness, composition and/or condition of a coating through various techniques and mathematical calculations. Gas Analytical Systems are used in the analysis of residual gases within a low pressure environment or vacuum. Vacuum Pumps are devices that remove gas atoms and molecules for the purpose of leaving behind a partial vacuum. Some examples of types of vacuum pumps are rotary vane pumps, diaphragm pumps, and scroll pumps. Every issue of VT C includes a product showcase focused on a specific topic relevant to Vacuum Processing, please see our editorial calendar which lists the topic for each issue.

TAGS:Hardware Processing Coating vacuumprocessing vacuumcoating vacuumtechnology vacu

<<< Thank you for your visit >>>

Vacuum Technology and Vacuum Processing - The only monthly magazine in the world devoted exclusively to vacuum technology, vacuum processing, hardware, thin films, sputtering, PVD & Gas analytical systems. VT&C spans virtually every industry and every product group in the modern world of technology.

Hot Websites