X431 Online Shop Blog - Just another WordPress siteX431 Online Shop Blog | Just another WordPress si

Time 2021-11-14 06:12:22

Web Name: X431 Online Shop Blog - Just another WordPress siteX431 Online Shop Blog | Just another WordPress si

WebSite: http://blog.x431.us

ID:231712

Keywords:

Shop,Blog,Online,Just,site,another,WordPress,

Description:

keywords:
description:Just another WordPress site

X431 Online Shop Blog Just another WordPress site

AUTOOL ATF602 Automatic Transmission Fluid Exchanger Posted on April 2, 2019 by admin

AUTOOL ATF602 Automatic Transmission Fluid Exchanger

AUTOOL ATF602 Function
1. After working for a long time, automatic transimmison cant exchange fluid 100%, and it will cause transimmision not work normally.
2. AUTOOL ATF602 Automatic Transmission Fluid Exchanger can pour into fresh oil and clean transimmison, fluid torque converter and transmission radiator in 20 miutes. It can exchange oil 100%.

Auto Gearbox Oil Exchange Cleaning Machine

AUTOOL ATF602 Features
1. Clear the metal pieces and oil sludge from automatic transimmison, and exchange the waste oil out from transimmison
2. Recover the accelartion of transmission
3. Decrease transmission vibration and fuel consumption
4. Reduce transmission temperature
5. Extend usage life of transmission

Automatic Transmission Fluid Exchanger

Operation Instruction of AUTOOL ATF602
1. Find a ATF cooling circulation pipe which is easy to dismantle, and dismantle the connector.
2. Start the car for a while. One side of the dismantled ATF cooling circulation pipe will inject oil, then you can judge inlet and outlet.
3. Use blue pipe to connect the oil outlet with the side of ATF cooling circulation pipe which does not inject oil.
4. Use red pipe to connect oil return pipe with the side of ATF cooling circulation pipe which injects oil. Connect a ball valve between the red pipe and ATF cooling circulation pipe.
5. Lift the car
6. Put the oil suction pipe into fresh oil bucket.
7. Start the car, shift the geart to make 3-4L waste oil to the waste oil bucket from transmission.
8. Power on the machine: Connect the power cable to 12V power supply. Rotate the emergency switch, you’ll see the indicator lights, then, the machine starts to work.
9. When the machine starts to work, please pour into fresh oil to the transimission. Automatic transmission begin to exchange waste oil to fresh oil. Compare the flow rate between the waste and fresh oil pipe, and the volume between the waste and fresh oil bucket, then, use the ball valve to control the outflow. (If the waste oil recycles faste, it will reduce oil return by turning down the valve)
10. When exchange the oil, shift every gear. Stay in one for about 5-10 seconds.
11. Observe the change of outflow and color in the waste oil tube, and regulate the outflow to meet the need of oil volume for transmission. When the fresh oil flows from the waste oil pipe, the waste oil is fully exchanged. Then, power off the machine.
12. Connect the transmission pipes as they are. Start the car, and shift to P to measure the oil. Then, add ATF oil according to oil level. At the same time, please check if the pipes leak. When the oil is added, drive about 1km to check again (It is very necessary).

Main Unit

Packing list:
1. The machine
2. Oil return pipe, oil inlet pipe
3. Connectors for cars
4. Instruction, certificate

Packing List

Precautions
Safety Precautions and Warnings
1. Please read the instruction before operating the machine
2. Please keep away from fire
3. If you find the machine is damaged during transportation, please complain to shipping company in the shortest time. We promise to pack it well before shipping, but any damage in transportation is out of our control
4. The plastic accessories are not under warranty
5. Please discharge the water in air compressor in 2-3 days, in order to prevent the pump from breakdown. Please keep the machine away from the wet.
6. Keep the machine clean, and place it in a cool place. Do not dry it in the sun.
7. If the machine can’t work properly, please contact your local distributor.

Pulsating Brake Fluid Bleeder Pro1 For Car Truck Motorcycle Posted on March 26, 2019 by admin

Pulsating Brake Fluid Bleeder Pro1 For Car Truck Motorcycle

Pulsating Brake Fluid Bleeder Pro1 Standard Configuration:
1pc * Pro1 Host
1pc * User Manual
1pc * Collection Container (1 Liter)
1pc * E20 Adapter

(Note: E20 Adapter coverage Benz, BMW, VW, Audi, Skoda, Volvo, Land Rover, Jaguar, Bently, Porsche, Buick, Chevrolet, Ford, Peugeot, Citroen, Chery, CHANGAN, Mazda, BYD, Roewe, Renault, Geely, Zhong Hua, Great Wall, MG, BESTURN, Lexus, Cadillac, etc.)

Standard Packing List

Operating Principle of Pulsating Brake Fluid Bleeder Pro1:
Brake fluid is taken from its container by a pump operating at up to 3.5 bar pressure and is continuously pumped into the brake fluid reservoir. The individual wheel brake cylinders can then be drained of their used brake fluid until the new brake fluid comes through. You thus avoid the regular emptying and filling operations, in contrast to conventional systems and also avoid any resulting water absorption in the brake fluid. The pump used to fill the brake fluid reservoir is equipped with pressure monitoring. Should it not be possible to build pressure or should the pump pull in air, the pump switches itself off automatically.

Features:
Compact Design, Portable
Suitable for Dot 3, Dot 4 and Dot 5.1 Brake Fluid Standard
Mechanical Pressure Control Regulation
Clean and exchange brake fluid of ABS, ESP, EDS and SBC.
Pulsating technique with 50Hz frequency, quick bleeding
Automatically stop working when the container becomes empty, avoid regular emptying and filling.
Adapter via zero pressure plug
Durable German type adapters

Pulsating Brake Fluid Bleeder Pro1 Technical Data:
Model: PRO 1
Max. Container Size: 5.4 Liters
Working Pressure: 0.6 3.0 bar
Main Voltage: AC220V 50/60Hz or AC110V 50/60Hz
Filling Hose Length: 3.5m
Dimension in mm: 280 × 260 × 410
Weight: 7.5Kg
Noise: ≦70dB

How important to exchange brake oil
After a long time use, brake fluid will go deteriorated, which will produce precipitation. It will block oil pipe and make brake oil shortage. It may make brake poor. So it is very necessary to exchange brake fluid regularly.

Follow are optional parts, not included in this item

P10 Adapter Kit List Description (Optional Parts)
1pc * Adapter 1: Coverage same as E20 Adapter, specially for narrow space vehicle
1pc * Adapter 2: Fit for JAC, Hyundai, DFM,KIA, Subaru, Renault,Roewe, Mitsubishi,Infiniti, BAIC BJEV,Nissan
1pc * Adapter 3: Fit for Buick Commercial Vehicle
1pc * Adapter 4: Fit for Ford, Audi, Peugeot,Toyota
1pc * Adapter 5: Fit for Honda
1pc * Adapter 6: Fit for BYD, Honda
1pc * Adapter 7: Fit for Buick, Ford, Mazda, Cadillac
1pc * Adapter 8: Fit for Dodge, Jeep, Chrysler
1pc * Adapter 9: Fit for Dongfeng Fengxing
1pc * Adapter 10: Fit for Nissan
1pc * Quick Female Adapter
2pcs * 8 / 9 / 10 / 11mm Bleeder Screw Wrench

P10 Adapter Kit

P10 Adapter Kit

Universal Adapter of Pulsating Brake Fluid Bleeder Pro1,Applicable beyond P10 Adapter Kit (Optional Parts, Inlet Diameter 80mm)

Universal Adapter

PRO1+P10 Adapter Kit+Universal Adapter

AUTOOL BX402 Automatic Brake Fluid Bleeder for 12V Cars Posted on March 26, 2019 by admin

AUTOOL BX402 Automatic Brake Fluid Bleeder for 12V Cars

AUTOOL BX402 Brake Fluid Bleeder
1.BX-402 applies vacuum suction. It improves the quality and increases the speed for brake fluid exchanging.
2.BX-402 leads to a new age for brake fluid exchange, and solve the problem of brake evacuation

Brake Fluid Bleeder

Instruction for vacuum suction （AUTOOL BX402）
1.Make sure the car is still.
2.Unscrew the screw of brake exhaust valve in one of the car wheels. Open the brake fluid tank
3.Connect return pipe with exhaust value by screw
4.When the pipes are connected well, start the machine. Connect the power cable to 12V power supply. Rotate the emergency switch, you’ll see the indicator lights, then, the machine starts to work.
5.The waste oil in brake oil pipe will be sucked out, and discharged into waste oil bucket. At the same time, pour fresh oil into brake fluid tank, to make sure the tank contains 1/3 oil untill the fresh oil is sucked out from the glass tube.
6.Do the same with other 3 wheels. When all are done, tighten up the screw of brake exhaust valve
7.Fill up the brake oil. Try the brake.

AUTOOL BX-402 Brake Fluid Bleeder

How important to exchange brake oil
After a long time use, brake fluid will go deteriorated, which will produce precipitation. It will block oil pipe and make brake oil shortage. It may make brake poor. So it is very necessary to exchange brake fluid regularly.

AUTOOL BX402 Packing List:
1. The machine
2. Oil return pipe, oil inlet pipe
3. Connectors for cars
4. Instruction, certificate

Whole Set

Kess V2 V5.017 No Token Limited with Red PCB Online Version Posted on March 12, 2019 by admin

Kess V2 V5.017 No Token Limited with Red PCB Online Version

KESS V2 V5.017 Advantages:
1. Its Master Version. SW Version: 2.47. Hardware Version: 5.017. KESS V4.036 only supports car, KESS V5.017 can support bike/car/truck/tractor !
The software is V2.47 , it is very easy to install, just follow the tips to  click Next Step, then it will work fine.
2. KESS V5.017 can do more 140 kinds vehicle types or protocols than KESS V4.036
3. You can use it Online and it will not damage the hardware.
4. SW support multi-languages: English, German, Spanish, Italian, Portuguese, French
5. KESS V4.036 no token limited for some car, has token limited for some other car.
KESS V5.017 has no token limited for all vehicles.
6. Working System: Windows XP Professional /Win7 / Win 8/ Win 10
7. With coverage of all major brands and protocols including Line, CAN, EDC17 and MED17 and for Ford J1850. KESS V2 is everything you need to work as a successful tuner at a very affordable price.
8. Kess V2 V5.017can read and write ECU via OBD2 port directly, no need disassemble ECU from the car, easy to use
9. Software without usb dongle, more Convenience.

Red PCB

Kess V2 V5.017 With NEW K-Suite 2.47 with exactly 7400 Vehicles added.
V2.47 add much more car models and ecu protocols than V2.23 Ksuite, even can support some vehicles untill 2017 !
V2.47 is no token limited , V2.47 is online version with internet available !
V2.47 Fixed checksum bugs !
V2.47 can work with EU RED / Green KESS V2 V5.017
( V2.47 can not work with KTAG V7.020 !!! KTAG V7.020 is SW V2.23/v2.25 )
( V2.47 and V2.23/V2.25 can be installed in same PC )

Notice:
1. Please do not update this tool online. NO NEED TO DISCONECT INTERNET when you use this tool. Do not update it online. It will damage the tool.
2. You have to connect with your car when you install the sw.(Otherwise sw cant be installed successfully).
3. KESS V5.017 can not work For Toyota Denso 76F00XX ECU Protocol,But KTAG V7.020 can work For Toyota Denso 76F00XX very well !
4. KESS V5.017 can support some truck/tractor/motorcycle, But KTAG V7.020 can support much more truck/tractor/motorcycle and works better for Diesel vehicles than KESS V5.017 !
5. If you mainly want to work for 24V truck and tractor , Ktag V7.020 is more suitable for you !

V5.017 Firmware Version

Software Version V2.47

KESS V2 V5.017 EU red PCB Feature :
1.the left upper corner and the lower right corner notch size is not the same
2.Extra buzzer
3.WFs = Infineon, BCR112 NPN Digital Transistor
4.27E = ON Semiconductor NUP2105LT1G
5.6DW = NXP BC817,215 NPN Bipolar Transistor
6.A6c =MMUN2113LT1G / MMUN2113LT3G
7.K5B = BC807-25-7-F PNP Bipolar Transistor
8.Using imported Japanese Murata filter NFE61PT472C1H9L

Kess V5.017 has several built in features and safeguards including:
1.Check of the battery voltage in real-time
2.Full Recovery function in case of problems
3.Automatic correction of the Checksum, (where available)
4.Boot-Loader mode supported
5.Management of the programming counters
6.ScanTool function to remove DTC
7.Several options of reading/writing speed
8.Option to write full file/section of the map

Kess V2 or KTAG:
Item Name :                          KESS Red                                KTAG Red
Software Version:                    V2.47                                     V2.23/V2.25
Hardware Version:                   V5.017                                   V7.020
Read/write ECU way           OBDII                                      via TRICORE or BDM etc.
Main function                       ECU remapping                     ECU remapping;Fix/repair ECU
Vehicle supported              mainly for home cars,trucks      Cars/truck/tractor/motorcycle/Heavy Duty/Boat

Package List:
1pc x Kess V2 Main Unit
1pc x 144300T 104
1pc x 144300T 103
1pc x 144300T 101
1pc x 144300T 106
1pc x 144300T 102
1pc x 144300T 105
1pc x 144300T 100
3pc x Chips Inside
1pc x Multi-Color Cable
1pc x USB Cable
1pc x Power Adapter
1pc x CD

Packing List

Truck Leak Locator Smoke A1 Pro Heavy Duty Pipe Leakage Tester Posted on July 3, 2018 by admin

Truck Leak Locator Smoke A1 Pro Heavy Duty Pipe Leakage Tester

Truck Leak Locator SMOKE A1 Pro Heavy Duty is designed for quick detecting the leakage of pipe systems on commercial heavy duty vehicles, including intake, engine, exhaust etc., with universal quick bladder to fit every intake/exhaust of heavy duty vehicles, but not suitable for components sensitive to smoke, such as lamp housing and cabin.

Note: Heavy Duty Model fits all commercial vehicle system and passenger car system expect EVAP system

Main Unit

Worlds smallest tool for commercial vehicle leak detection
Work with external shop air to provide 0~29psi adjustable test pressure and up to 30L/Min flow rate
DC 24V vehicle bettery driven
Support UV detection method for tiny leaks
Quick heavy duty bladder to fit every intake/exhaust
Instant smoke generation
Smart 5 minutes working cycle controller with single control button

Top 8 Reasons to Get Diagnostic Leak Detector

1. Your Scan Tools Can Only Do Half of the Work
Your scan tools help you acquire the knowledge about which sensor had got the sampled data out of range. But your scan tools won’t tell you the cause/reason of the fault, and where to find it. A Diagnostic Leak Detector will tell you where the problem is, which caused the sensors to get wrong data.

2. Over 60% of the DTCs Are Pressure Related
Sensors sample voltage, temperature and pressure, of all the DTCs that possibility generated, over 60% are pressure related,
regardless it’s an air pressure DTC, or an oil pressure DTC. With a Diagnostic Leak Detector, these DTCs are much easier to erase.

3. Increase Income Per Service
By finding more hidden problems in a vehicle and proving it to the vehicle owner necessity of extra service, a Diagnostic Leak Detector will help increase your income per service.

4. Help Reduce Labor Cost
A Diagnostic Leak Detector helps technicians to locate problems currently in short time, avoid possibility of wrong diagnosis of the vehicle.

5. Enhance Capability of More Service Calls
By reducing your service time cost, a Diagnostic Leak Detector makes your workshop capable of more service calls.

6. Ease the Pain of Finding Leaks
The vehicle driven in the workshop with engine running hot, which put technicians in a bad working condition, with a Diagnostic Leak Detector, technician don’t have to touch the hot surface, reduce possibility of getting hurt in work.

7. More Professional in Facing Customers
Customers may feel sorry for you if you jump onto and off the car to find problems. A Diagnostic Leak Detector will make technician’s work more professional with convincing result.

8. Small Investment, Big Turnout
A Diagnostic Leak Detector is affordable for all level of workshops, and the equipment will pay for itself back by a few jobs.

Truck Leak Locator Specifications:

Pressure: 0 29 Psi
Chemical Refill: 15ml
Smoke Flow: 30L/Min
Std. Pack: Main Unit, Intake Bladder, Plastic Carry Box
Power Supply: DC 12/24V Vehicle Battery
Unit Dim:L10cmx W13cmx H21.5cm(without hanger)
Air Source: External Shop Air
Delivery Dim: L34.5cmx W27cmx H14cm

Truck Leak Locator Packing List

1x Plastic Casing
1x Main Unit (there is a little different with picture)
1x Intake Bladder (different for diesel car and diesel truck)
1x Power Cords
1x Smoke Tube
1x Hook
1x Manual

If you need this item , please CLICK HERE

Optional Parts(not included in the tool): If you need UV Detection Kit., please contact me to check the price.

for Diesel Truck

for Diesel Car

Smoke Leak Detector ALL300 HD Heavy Duty Truck Pipe Leakage Tester ALL-300 Posted on July 3, 2018 by admin

Smoke Leak Detector ALL300 HD Heavy Duty Truck Pipe Leakage Tester ALL-300

Smoke Leak Detector ALL300 HD is a high pressure diagnostic leak detector for detecting leaks in systems that run at high pressure, such as passenger car turbo system, brake booster, exhaust, lamp housing, medium Heavy Duty commercial trucks’ air intake system, exhaust system, manifold, coolant tank, sealing, gasket and fuel pipe etc.

Note: Heavy Duty Model fits all commercial vehicle system and passenger car system expect EVAP system

For Truck

Smoke Leak Detector ALL300 HD Features:

Dual mode support: air mode for test leaks, smoke mode for finding leaks.
Instant smoke generation
Super easy in operation, only a Start/Stop button.
Smart controlled 10 minutes working cycle
0~2 bar / 29 Psi variable pressure output
Heavy Duty bladder that fits intake/exhaust size from 8cm/3.2”to20cm/7.9”
Dual Heavy Duty bladders equipped, both could be used as block-off.
DC 12V/24V auto-adaptive, vehicle battery driven.

ALL-300 HD

Top 8 Reasons to Get Diagnostic Leak Detector

1. Your Scan Tools Can Only Do Half of the Work
Your scan tools help you acquire the knowledge about which sensor had got the sampled data out of range. But your scan tools won’t tell you the cause/reason of the fault, and where to find it. A Diagnostic Leak Detector will tell you where the problem is, which caused the sensors to get wrong data.

2. Over 60% of the DTCs Are Pressure Related
Sensors sample voltage, temperature and pressure, of all the DTCs that possibility generated, over 60% are pressure related,
regardless it’s an air pressure DTC, or an oil pressure DTC. With a Diagnostic Leak Detector, these DTCs are much easier to erase.

3. Increase Income Per Service
By finding more hidden problems in a vehicle and proving it to the vehicle owner necessity of extra service, a Diagnostic Leak Detector will help increase your income per service.

4. Help Reduce Labor Cost
A Diagnostic Leak Detector helps technicians to locate problems currently in short time, avoid possibility of wrong diagnosis of the vehicle.

5. Enhance Capability of More Service Calls
By reducing your service time cost, a Diagnostic Leak Detector makes your workshop capable of more service calls.

6. Ease the Pain of Finding Leaks
The vehicle driven in the workshop with engine running hot, which put technicians in a bad working condition, with a Diagnostic Leak Detector, technician don’t have to touch the hot surface, reduce possibility of getting hurt in work.

7. More Professional in Facing Customers
Customers may feel sorry for you if you jump onto and off the car to find problems. A Diagnostic Leak Detector will make technician’s work more professional with convincing result.

8. Small Investment, Big Turnout
A Diagnostic Leak Detector is affordable for all level of workshops, and the equipment will pay for itself back by a few jobs.

Main Unit

Smoke Leak Detector ALL300 HD Specifications:
Pressure: 0 ~ 2 Bar / 29 Psi
Chemical Refill: 50ml
Smoke Flow:15L/Min
Unit Dim.: L22cm x W23cm x H29cm
Power Supply: DC 12V/24V VehicleBattery
Delivery Dim.: L40cm x W36cm x H31cm
Air Source: Shop Air

Optional Parts(not included in the tool): If you need this optional parts, please contact me to check the price.

Passenger Car Intake Bladder
Mister Wand
Cooling System Pressure Test Kit
UV Detection Kit

Optional Parts

If you need this item , please CLICK HERE

Porsche Piwis Tester III with Panasonic CF54 Piwis3 PT3G Ver 37.250.020 Posted on June 26, 2018 by admin

Porsche Piwis Tester III with Panasonic CF54 Piwis3 PT3G Ver 37.250.020

Porsche Piwis Tester III is the newest fully operational diagnostic equipment based on PIWIS vehicle interface and Porsche software. Piwis Tester III provides exclusive support for Panamera G2, Cayenne E3 and all 2017 model range and above also provides legacy support for older models.

It is the new third generation Porsche diagnostic tool, its update to modern user interface, more faster performance, also have: license automatic update, online view of the technical documents, fault finding guide, online programming, faster and more efficient work.

Main Unit

Version: 37.250.020
License: Unlimited
Update: Via DVD or Online
Support Online Programming, no develop mode
Multi-Languages

Languages

Porsche Piwis Tester III main functions
• General ECU diagnostics (DTC read/clear)
• Guided fault finding
• ECU programming/coding
• Real-time control parameters display
• Electrical schematics mapping

Porsche PIWIS 3 advantages
• Exclusive support for 2017 model range and above (Panamera G2, Cayenne E3)
• Fast and stable connection Simulation mode (diagnostic session without VCI connection)
• End user capable DVD update
• Wired USB connection

Porsche PIWIS 3 Packing List:
1pc x Piwis 3 VCI
1pc x USB Cable
1pc x Laptop Power Adapter
1pc x Panasonic CF54 Laptop(Software Preinstalled,Ready to work)

If you need this tool, please CLICK HERE

Whole Package

Piwis 3 with Panasonic CF54 Laptop

Porsche Piwis 3 Interface

Autel MaxiFlash Elite J2534 ECU Programming Tool Works With Maxisys 908/908P Posted on September 8, 2017 by admin

Autel MaxiFlash Elite J2534 ECU Programming Tool

Autel MaxiFlash Elite as a multi-protocol Pass-Thru vehicle interface, MaxiFlash Elite is a fully compliant SAE J2534-1 SAE J2534-2 (March 2006) device. Specially designed to provide users with convenient PC communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, MaxiFlash Elite offers the most significant features desired by OEM customers: reliability, fast performance and flexibility.

Autel MaxiFlash Elite Features and Functions:

1. Fully compatible with both SAE J2534-1 and J2534-2 reprogramming standards
2. Performs the standard PassThru J2534 functionality
3. Compatible with Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics
4. Fast performance ensures quickly reprogramming even the newest controllers
5. Wireless with advanced networking functions
6. Built-in wireless and data storage
7. Rugged design capable of withstanding harsh environments
8. Internet upgradeable

MaxiFlash Elite J2534 Device

Notice:
1. MaxiFlash Pro can work together with Autel Maxisys 908/ 908P to support more cars
2. If you work it alone, it can only support Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics (Need to Get Software Yourself)
3. For programming functions, customers need to have online account and password

Interface

Autel MaxiFlash Elite Specification:
Input Voltage Range: 6VDC to 26VDC
Supply Current: 350mA @ 6VDC 200mA @ 12VDC 110mA @ 24VDC
Operating Temperature: 0°C to +60°C (ambient)
Storage Temperature: -65°C to +100°C (ambient)
Dimensions: Length: 183.8 mm (7.23) Width: 135.5mm (5.33) Height: 41 mm (1.6)

Autel MaxiFlash Elite Package Including:
1pcs x J2534 ECU Programming Device
1pc x MVCI to OBDII Cable
1pc x Wi-Fi Antenna
1pc x USB Cable
1pc x OBDII 16PIN Cable
1pc x Users Manual
1pf x Ethernet Serial Cable
1pc x AC/DC External Power Adapter
1pc x CD

If you need the Autel MaxiSys MS908, please CLICK HERE
If you need the Autel MaxiSys MS908P, please CLICK HERE

Packing List

Launch X431 V Plus HD Module Heavy Duty Truck Diagnostic Tool 2in1 Posted on September 6, 2017 by admin

Launch X431 V Plus HD Module Heavy Duty Truck Diagnostic Tool 2in1

Launch X431 V Plus HD Module is specifically designed to diagnose diesel and gas-fueled heavy-duty vehicle models of 12V 24V voltage.

Whole Package

Note: Launch X431 V Plus supports more than 129 car models now, includes the local vehicles brands in every country, such as India tata, australia Holdon, ford, and so on. If you need the local vehicles, pls contact us when you receive the product.

Part 1: heavy-duty truck diagnostic module details

X-431 V+ heavy-duty module is specifically designed to diagnose diesel and gas-fueled heavy-duty vehicle models of 12V 24V voltage.

Ports and indicator of heavy-duty truck module

Ports/Iindicator

Main Features:
Unique LAUNCH cloud diagnosis technology
Support wired diagnosis
Support diagnosis for all car models of gasoline, diesel and natural gas engines that meet
Euro III-Euro VI standards
Industrial shockproof design, perfect for the working environment in repair shops
Advanced modularization design technology, automatically switch between12V and24V
power
Diagnostic hardware is designed according to international standard, compatible with diagnostic interfaces of all car models worldwide
Multiple diagnostic devices available, such as X-431 PR03S, X-431 PAD III, etc

Software diagnostic platform:
Read fault code
Clear fault code
Read data stream
Actuation Test
Special functions
Read freeze frame
ECU program

Software of heavy-duty truck module:

Widest Coverage

Main models:

China: DONGFENG SERIES \ FAW JIEFANG \ SINOTRUK \ FOTON AUMAN \ JAC SERIES \ YUTONG \ KINGLONG……
USA: FREIGHTLINER, INTERNATIONAL, KENWORTH, PETERBILT, STERLING…
Europe: Mercedes Benz \MAN \ VOLV0 \ SCANIA \ IVEC0 \ DAF \ RENAU LT
Asian: HIN0, FUS0, ISUZU

Main working Parameters:
Working temperature:-15-60°C
Storage temperature:-20-70°C
Relative humidity: 10%-80%
Product size: 110mm*178mm*50mm
Communication: USB, Bluetooth, Serial Port

X-431 HD Module

Part 2: Launch X-431 V+ Details:

X-431 V+ is a new Android-based vehicle trouble diagnostic device developed for internet applications. It inherits from LAUNCH’s advanced diagnosing technology and is characterized by covering a wide range of vehicles, featuring powerful functions, and providing precise test result.

Through the Bluetooth communication between vehicle diagnostic connector and variant mobile intelligent terminals, it achieves full car model and full system vehicle trouble diagnosis, which include Reading DTCs, Clearing DTCs, Reading Data Stream, Actuation Test and Special Functions.

Meanwhile, taking advantage of mobile internet, it integrates more application and service, such as Repair Data and Update etc.

X-431 V+ adopts a higher performance-price ratio tablet computer, which is equipped with Android 5.1 operating system, 1.3GHz quad core CPU and 10.1 HD display.

Launch X431 V Plus Features:

1. Diagnose:
Diagnose the electronic control system of prevailing vehicle models covering Asian, European, American and Chinese. Diagnosis functions include: Read DTCs, Clear DTCs, Read Data Stream, Special Functions etc.

Specially designed for Android platform with user-friendly interface.

Via Bluetooth, it is simple for the diagnostic connector to communicate with X-431 V+.

Equipped with an exclusive X-431 V+ protective sleeve to prevent it from being damaged.

Multiple maintenance and repair functions are supported to boost shop revenue: Electronic throttle position reset/learn and gear learning etc.

2. Repair Data: Provides a mass of service information for various vehicle models, which enables users to retrieve service data of some vehicle online.

3. Update: Lets you update your diagnostic software more efficiently.

4. Browser: Built-in Wi-Fi module makes surfing on the internet freely.

5. Email: Allows you to send and receive emails.

6. Settings: To configure your personalized X-431 V+ through it.

7. Other additional functions: Alarm, Calendar and Calculator etc.

X431 V+ 10.1 Tablet

X-431 V+ Technical Parameters:
Operating system: Android 5.1
CPU: Quad-core 1.3GHz processor
Battery: 7000mAh rechargeable polymer lithium battery
Memory: 1GB
Storage capacity: 16GB
LCD: 10.1 inch
LCD resolution: 1280 x 800
Touch screen: Capacitive touch screen
Cameras: 5.0 mega pixels rear and 2.0 mega pixels front
Wi-Fi: Support 802.11a/b/g/h
Bluetooth: Supported
Working temperature: 0℃ ~ 45℃
Storage temperature: -20℃ ~ 70℃

DBSCar Connector Parameters:
Working voltage: 9 ~18V
Average working current: About 35mA
Standby current: About 25mA
Working temperature: -20 to 55℃
Storage temperature: -30 to 70℃
Storage humidity: 80%
Working humidity: 60%

What is advantange compare with X431 V?
1. HUAWEI Hisilicon Quad-core 1.2G Hz, faster speed.
2. 10.1 inch multi touch screen capacitor provides better view for diagnostic and data flow.
3. 1GB of memory and 8 GB of storage for data.
4. Contain 72 car brands from US, europe, asia and so on.
5. Support wifi / Bluetooth and one-click update, 999USD/Year.
6. 6600 mAh Li battery, can keep working for 8 hours.
7. Multi-Languages: English, German, French, Italian, Spanish, Portuguese, Polish, Russian, Japanese.
8. Original goods with full time technical service and warranty.

If you need the Launch X431 V Plus, Please CLICK HERE
If you need the Launch X43 1HD Module, please CLICK HERE

Launch X431 V Plus HD Module Package List:

Packing List

Packing List

Software List

Item Comparision

ALL300 Pro Turbo Automotive Diagnostic Leak Detector ALL-300 Posted on September 1, 2017 by admin

ALL300 Pro Turbo Automotive Diagnostic Leak Detector ALL-300

ALL300 Pro Turbo Model also applicable on turbo system, but NOT suitable for EVAP system.

Smoke Leak Locator All-300 ALL-300 is an innovative product that provide safe and convenient method to check leaks in automotive systems! It is so far the fastest way of detecting locating the leak position of all pipe system in an vehicle at an affordable price.

Smoke Automotive Leak Locator ALL-300 Professional, Flexible, Affordable

With Pressure Gauge

Smoke Leak Locator All-300 Four Reasons to get:

1. Time saving features
1). Help locate the leak position on all vehicle systems in 1 minute
2). Fast determine the leak size by read the flow meter

2. Professional
1). Easy to Operate
2). Fast in helping locate the leak
3). Multi-functional
4). Dual Mode: Smoke Mode, Air Mode
5). Visual pressure minitoring
6). Visual flow control
7). Inbuild air compressor
8). 5L/Min Super flow rate
9). Visual monitoring of smoke fuel level
10). Bigger oil tank up to 200ml capacity
11). Best mate for automotive scanner

3. Affordable
1).Unbeatable price / performance ratio
2).Designed for long time use

4. Flexible
With inbuild air compressor, and power supplied by 12Volt vehicle battery, its the best tool for leak locating regardless of the working condition.

ALL-300 Front Viewer

Smoke Leak Locator All-300 Highlights:

1. Significantly reduce the service time-cost
2. Ensure better service quality and discover potential service request
3. AL-300 is a handy new generation of automotive system leak locator
4. AL-300uses Mineral Oil to generate smoke. the oil is possible to get at drug store, or supermarket(Mineral Oil based baby Oil) ,a 30 ML refill will be enough for test
for 40 times( varies, depend on how long the user operate the equipment for each test.)
5. AL-300 is a one-time invest for a workshop or garage, but will help so much in work

All300 Smoke Automotive Leak Locator Features:

1. Simple To Operate
1). The Smoke Automotive Leak Locator is easily controlled with a nice keypress film and a flow control. with visual indication of the pressure level and
flow status.
2). Stablized output pressure is perfect to perform leak test of all pipe system with no damage to the vehicle sealing.
3). Save time and fast leak detection. In most cases, a scan tool may find out pressure sensors abnormal etc., while actully the pressure low problem is caused by leak somewhere.
4). Use Air Mode to fast determine if theres a leak. and use Smoke Mode to find out where the leak is.
5). Use Air Mode to fast determine if theres a leak. and use Smoke Mode to find out where the leak is.
6). Adjustable air flow to perform leak test on different system that requires different flow amount.
7). If the system doesnt leak, when reached the required pressure, the flow meter readings will drop to 0, otherwise, can determine the leaksize by the flow rate

2. Multi-function
The Smoke Automotive Leak Locator is a multi purpose tool essential for EVAP system, but also applicable for: EGR valves, Gaskets Fittings, Hoses, Worn Throttle shafts, Break Boosters, Catalytic Converters, Oil Leaks, Lamp Housings, manifolds and more.

3. Visual monitor smoke fuel level
Fast to know the fuel level, dont have to guess if its time for fuel refill.

Back View

All-300 Smoke Automotive Leak Locator Target customer:
Car manufacturer workshops, Independent Workshop or tire service shop, garages etc. where Professional, reliable and affordable equipment is needed.

ALL300 Pro Turbo Specifications:
1. Air flow control: 0.1~5 L/MIN
2. Power supply : DC12V, 8A, 100W
3. Full set of accessories

Requirements on Surroundings:
1. Ambient Temperature 20°C ~ + 50°C
2. Relative Humidity a‰¤ 90%

ALL300 Pro Turbo Packing List:

1pc * Main Unit
1pc * Plasxtic Casing
1pc * Power Cords
1pc * Smoke Tube
1pc * Universal Intake Adaptor
1pc * Cap Topper(set)
1pc * Universal Intake Adaptor
4pcs * Screw
1pc * User Manual

If you need it ALL-300 EVAP Smoke Leak Detector, please CLICK HERE to order it.

Packing List

Intake Adapter

Recent Posts AUTOOL ATF602 Automatic Transmission Fluid Exchanger Pulsating Brake Fluid Bleeder Pro1 For Car Truck Motorcycle AUTOOL BX402 Automatic Brake Fluid Bleeder for 12V Cars Kess V2 V5.017 No Token Limited with Red PCB Online Version Truck Leak Locator Smoke A1 Pro Heavy Duty Pipe Leakage Tester Archives April 2019 March 2019 July 2018 June 2018 September 2017 August 2017 June 2017 May 2017 Categories Auto Diagnostic Tools JDiag Tools Others Softwares Meta Log in Entries RSS Comments RSS WordPress.org

TAGS:Shop Blog Online Just site another WordPress 

<<< Thank you for your visit >>>

Just another WordPress site

Hot Websites