DoLookDown.org | Remote Sensing for the Geosciences

Time 2021-11-20 23:27:37

Web Name: DoLookDown.org | Remote Sensing for the Geosciences

WebSite: http://www.dolookdown.org

ID:242445

Keywords:

Remote,org,DoLookDown,Sensing,Geosciences,the,for,

Description:

keywords:
description:

DoLookDown.org Remote Sensing for the Geosciences

Home Menu Skip to primary content Skip to secondary content Home 12367

Students Doing Science Posted on April 23, 2016 by ZackMay 6, 2016 1

Whenever we do a flight day, we try and have at least one student taking photos and documenting the process.  Here are some Folsom Lake College students at our most recent BAP field day doing science taking GPS coordinates, shooting the balloon with the laser rangefinder, and logging data.

BAP Field Day 2016.04.20 Posted on April 21, 2016 by ZackApril 21, 2016 1

Field day with Jason Pittmans (Geosciences) class yesterday.  The balloon pulled well, I think thanks in part to the weight reductions we achieved with the new 3D printed picavet part.

Full dataset here:  https://drive.google.com/folderview?id=0B1HizVK87qvsS3kxX3A4OGM4WFUusp=sharing

3D Printed Picavet Posted on April 18, 2016 by ZackApril 18, 2016 2

Did a quick SketchUp model of a picavet and printed it for a BAP day on Wednesday. Much lighter than the setup it replaced.

When I have a little more time, Ill look into replacing all the metal parts with printed plastic ones.

The Garden from Above Posted on September 29, 2015 by ZackSeptember 29, 2015 Reply

Following a successful field day with students, the balloon had enough spirit to pull the iPhone up over the site of FLCs new experimental garden.  It may not look like much now, but there are plans for additional planter boxes, shrubs, and all sorts of growing goodness.

If At First You Dont Succeed Field Day 04.23.15 Posted on April 24, 2015 by ZackMay 27, 2015 1

Kite? Check. Helium? Check. It takes quite a bit of gear to execute a proper field day. Professor Jason Pittman arranged a KAP/BAP field day, and we headed up to the wetlands on the north end of campus to meet students around noon. Following a brief safety talk and protocol orientation, one team set out to launch the balloon, while the other team assembled and attempted to launch the kite.

Half-full, balloon #1 revealed some pinhole leaks, so we tried to move the gas to a second balloon, which didnt work at all, and we popped the first one in the process. Fortunately, we were able to get one of the spares filled and in the air.

The kite team struggled with inconsistent wind. After many heroic attempts, they eventually scrapped the launch and joined the balloon team to walk the wetlands.

We flew for ~40 minutes, with the camera (iPhone on the picavet, running Timelapse at 10 second intervals), and captured some really good shots.  (Link:  The full set images from 04.24.15 BAP field day.)

At 2 oclock, we headed back to the cars to stow the gear and head out. A few students hung around and had a chance to fly our newest quad.

All things considered, a successful field day.

3D Printing a GoPro Lens Cap Posted on February 4, 2015 by ZackFebruary 4, 2015 Reply

We got some new GoPro Hero 4 cameras for the project, and as usual, the cameras dont include a lens cap.  Downloaded one from Thingiverse and printed out a few.  Still working out some printing issues, but they printed well enough, and fit perfectly.

(CC BY-NC by Thingiverse user PrintTo3D http://www.thingiverse.com/thing:13276)

iPhone/GoPro Mount Mashup Posted on January 22, 2015 by ZackJanuary 22, 2015 Reply

Weve had some success using the iPhone for aerial imaging from kites, balloons, and quads, so Ive been looking for a way to mount one to our new Phantoms GoPro mounting base plate. A quick search of http://thingiverse.com returned this GoPro-compatible iPhone case created by N3W0NE (CC BY-NC-SA). I printed it out on our new Printrbot, and while it technically fits, it needs a little adjustment to be ideal for our situation.  Most GoPro and iPhone users want to mount cameras facing forward, but ours needs to be pointing straight down, which sometimes doesnt quite work various mounts and housings get in the way.  For this model to work correctly for our needs, it needs to be tweaked so that the GoPro mount bit is on the short edge of the iPhone.  Not a big deal, and Im grateful that communities like Thingiverse exist, and that folks are willing to share their work.

New Quadcopter DJI Phantom 2 Posted on December 13, 2014 by ZackDecember 13, 2014 Reply

The new quadcopter arrived, and it flies like a dream right out of the box.  Weve been looking for a stable, predictable (some would say boring) flyer, and this machine seems to fit the bill.  Excited to put it through its paces in the next few weeks!

Before and After Posted on November 13, 2014 by ZackNovember 27, 2014 1

Thanks to the very responsive team at Publiclab.org Stewart, Jeff and Liz!   MapKnitter is back up and running exports.  Heres a before and after version of one students work with the balloon photos:

Overall, a fine result, but a few anomalies might bear some experimentation.  For instance, the dropouts toward the top of the north/south path on the left-hand side, and a small faded out area near the bottom left, just above where the east/west and north/south paths join.  If I had to guess, Id say these were the result of too many overlapping images in those particular sections.  I think Ill see about thinning out some of the overlaps to see if I cant get a cleaner export.

Update Preliminary MapKnitter Output Posted on November 12, 2014 by ZackNovember 12, 2014 Reply

Heres a screenshot of one of the many photo composites that students are working on with the data gathered from the balloon flight a couple of weeks ago:

MapKnitter is being finicky about exports, but hopefully that will resolve itself before long, and students will be able to get their hands on the stitched photos for further analysis.

@DoLookDown on Twitter SearchTag Cloud3D printingaerial imagingardupilotarduplaneartballoonbapbif2012buildbuild logcameracrashec3 connectorESCflightGISgoproheroiphoneirkapkitekite aerial photographymappingmapsmotorsOpenROVparallaxpicavetplant stress cameraprogrammingpropellerpropsquadcopterquadrotorquadroverradioremote sensingroboticsrovsettingssoldervideowiringwiring harnessArchives April 2016 September 2015 April 2015 February 2015 January 2015 December 2014 November 2014 October 2014 September 2014 May 2014 April 2014 January 2014 December 2013 November 2013 October 2013 September 2013 May 2013 April 2013 March 2013 February 2013 December 2012 November 2012 October 2012 September 2012 June 2012 May 2012 April 2012 March 2012 January 2012

TAGS:Remote org DoLookDown Sensing Geosciences the for 

<<< Thank you for your visit >>>

Hot Websites