WireBasics, a Continuity Tester, Cable Tester, and Wire Harness Tester in one

Time 2020-12-25 02:03:45

Web Name: WireBasics, a Continuity Tester, Cable Tester, and Wire Harness Tester in one

WebSite: http://wirebasics.com

ID:145088

Keywords:

Tester,Cable,WireBasics,

Description:

Digital Programmable Logic Designed To Detect Shorts, Opens, and Crossed Connections. Check out our adaptors. If you don't see what you need, don't worry we do custom. Contact Us. We Like Texting! Call or Email if you have complex questions. 765-615-1498 todd@protronllc.com Internal SPDT relay for controling external devices. Two pin TTL level output for triggering printer or other digital device. Built in 9V battery compartment for portable use. The CT-16 will detect and locate: Shorts Mis-Wires Open Circuits Incorrect Splices Product Features: Two diagnostic indicators for each circuit under test Pass and fail lamps for fast reliable testing Can be biased for detecting high resistance connections Will operate on 9V battery for portable use Compact and lightweight High impact rugged plastic case High quality wear resistant face panel Designed with the budget conscious shopper in mind Accessories available for your testing needs include... Custom Length Ribbon Cables Custom Exact Termination Adaptors (contact us) Resistive Biasing Module Pin Out Reconfiguring Module When you purchase the CT-16 Kit you will receive... The CT-16 Continuity Tester Two Universal Tension Contact Adaptors Two 16 Conductor 24 inch Ribbon Cables Wall Wart 6VDC Power Adaptor Operators ManualWhat makes the CT-16 better? The WireBasics CT-16 is better because the connectors that interface your test piece are not part of the base unit. Other units break down after repeated use and the unit must be repaired or replaced. Our product interfaces the test piece via our unique adaptors and ribbon cables. If you wear out the adaptor simply replace it and you are testing again in minutes.The ribbon cables that interface the adaptors to the tester also add the advantage of remote placement. If you have a long assembly to test you can simply purchase one of our extra length ribbon cables for your test board.The advantages don't stop there, the programmable CT-16 will test cables with multiple splices inside. And when it finds an error it tells you exactly where the error is and the type, ie:open, cross, or short. We have not seen any other product that measures up in this price range. The green adapters you see in the photo above are connected to the tester via the gray ribbon cables provided with the kit. Once connected the adaptors allow you to insert idividual wires into the green spring loaded contacts. This feature makes it easy for you to connect almost any wire harness or cable device. All you need to test your harness or cable is a mating connector to your ends with stripped wires. View the shop online pagefor more information. We also carry pre-made adaptors, these include: CAT-5E/NETLAN, DB-9, DB-15, RCA, LPT1, IDE, COM PORT (BOTH 9 AND 25 PIN). We also have items not yet listed on this page and we make custom adaptors for your specific needs. For more information text or call(765)615-1489 or email us at info@wirebasics.com

TAGS:Tester Cable WireBasics 

<<< Thank you for your visit >>>

wirebasics ct-16 continuity tester cable tester wire harness tester an economical affordable solution to our competitors such as dynalab cirris camiresearch cami research and cable test

Hot Websites